Computational Seismology
Numerical first derivative

This notebook is part of the supplementary material to Computational Seismology: A Practical Introduction, Oxford University Press, 2016.

Authors:

Excercise:

Initialise arbitrary analytical function and calculate numerical first derivative with 2-point operator, compare with analytical solution. Task: extend scheme to 4 point operator and demonstrate improvement (see Chapter 4)

This exercise covers the following aspects:

  • Calculation of numerical first derivative
  • Comparison with analytical solution

Please, execute first!

In [ ]:
# Import Libraries
%matplotlib notebook
import numpy as np
import math
import matplotlib.pyplot as plt

plt.style.use("ggplot")

We initialise a Gaussian function

\begin{equation} f(t)=\dfrac{1}{\sqrt{2 \pi a}}e^{-\dfrac{t^2}{2a}} \end{equation}

In [ ]:
# Initial parameters
tmax=10.0                       # maximum time
nt=100                       # number of time sample
a=1                           # half-width      
dt=tmax/nt                    # defining dt
t0 = tmax/2                   # defining t0

time=np.linspace(0,tmax,nt)   # defining time

# Initialization gaussian function with zeros           
f=(1./np.sqrt(2*np.pi*a))*np.exp(-(((time-t0)**2)/(2*a)))  # eq.(4.32) p. 80
    
# Plotting of gaussian
plt.figure()
plt.plot(time, f)
plt.title('Gaussian function')
plt.xlabel('Time, s')
plt.ylabel('Amplitude')
plt.xlim((0, tmax))
plt.grid()
plt.show()

In the cell below we calculate numerical derivative using two points

\begin{equation} f^{\prime}(t)=\dfrac{f(t+dt)-f(t-dt)}{2dt} \end{equation}

and analytical derivative \begin{equation} f^{\prime}(t)=-\dfrac{t}{a}\dfrac{1}{\sqrt{2\pi a}}e^{-\dfrac{t^2}{2a}} \end{equation}

In [ ]:
# First derivative with two points

# Initiation of numerical and analytical derivatives 
nder=np.zeros(nt)          # numerical derivative
ader=np.zeros(nt)          # analytical derivative

# Numerical derivative of the given function
for it in range (1, nt-1):
    nder[it]=(f[it+1]-f[it-1])/(2*dt)

# Analytical derivative of the given function
ader=(-(time-t0)/a)*(1/np.sqrt(2*np.pi*a))*np.exp(-(time-t0)**2/(2*a))     

# Plot of the first derivative and analytical derivative
plt.figure()
plt.plot (time, nder,label="Numerical derivative", lw=2, color="yellow")
plt.plot (time, ader, label="Analytical derivative", ls="--",lw=2, color="red")
plt.title('First derivative')
plt.xlabel('Time, s')
plt.ylabel('Amplitude')
plt.legend()
plt.grid()
plt.show()

In the cell below calculation of the first derivative with four points is provided with the following weights:

\begin{equation} f^{\prime}(t)=\dfrac{\dfrac{1}{12}f(t-2dt)-\dfrac{2}{3}f(t-dt)+\dfrac{2}{3}f(t+dt)-\dfrac{1}{12}f(t+2dt)}{dt} \end{equation}
In [ ]:
# First derivative with four points

# Initiation of derivative
ffder=np.zeros(nt) 

# Type your code here:  
for it in range (2, nt-2):
    #ffder[it]=

# Plotting 
plt.figure()
plt.plot (time, nder,label="Derivative, 2 points", lw=2, color="violet")
plt.plot (time, ffder, label="Derivative, 4 points", lw=2, ls="--")
plt.title('First derivative')
plt.xlabel('Time, s')
plt.ylabel('Amplitude')
plt.legend()
plt.grid()
plt.show()
In [ ]: